- Single Stage Hammer CrusherThe PCF series of single stage hammer crusher is suitable for crushing limestone, gypsum, coal, marlstone, sandshale, and other materials whose compressive strength is not greater than 200MPa. This product is characterized by large crushing ratio, uniform size of the processed material, simple structure, reliable running, convenient maintenance, and low operating costs, which is widely applied in the cement industry.
- Hammer CrusherThe PC series of hammer crusher is suitable for crushing various brittle materials, such as coal, chalk, gypsum, alum, brick, tile, limestone, etc., and the compressive strength of the material should not exceed 100MPa. This hammer crusher is composed of rack, rotor, screen bar, hammer, and other components. The motor drives the rotor through the flexible coupling. The materials are crushed by the collision between the hammer and crushing plate caused by the rotation of rotor.
- Jaw CrusherThe eccentric shaft is driven to rotate by the motor through the pulley, making the moveable jaw approach and leave the fixed jaw periodically, so as to squeeze, rub, and grind the material. Consequently, the material becomes smaller and gradually falls until it is discharged from the discharge port.
- Impact Hammer CrusherThis series of impact hammer crusher is characterized by large crushing ratio, high efficiency, energy saving, and convenient maintenance. It is widely applied in the water and electricity, highway, railway, construction, and other fields. Driven by the motor, the rotor rotates at a high speed. The fed material collides with the hammer on the rotor and is crushed. It is then knocked back to the lining plate and is crushed again. Finally, the material is discharged from the discharge port.
- Cone CrusherDry oil or water is used for sealing, isolating the stone powder from the lubricating oil to ensure reliable operation. The form of the crushing chamber depends on the use of the ore. The standard type, PYB, is suitable for medium crushing while the PYD and PYZ are applicable to fine crushing.
The spring system is used for overload protection, which can let iron block through the crushing chamber without damaging the cone crusher.
Raw Crushing Plant/ Crushing Equipment/Crushing Machinery
Rock Crusher Manufacturer | Gravel Crusher | Quarry Crusher